About SCS signer application
In order to be able to use the SCS signer application with a service, the service needs to support SCS interface. SCS signer application works currently with following services: • Kelain *: issuing electron
In order to be able to use the SCS signer application with a service, the service needs to support SCS interface.
SCS signer application works currently with following services:
•
Kelain *: issuing electronic prescriptions (doctor, dentist)
* SCS signer application works with Kelain service, but Kela does not officially support its usage.
SCS signer application enables your device to authenticate and generate digital signatures in services that support the SCS interface. All you need is the SCS signer application, a smart card issued by Digital and Population Data Services Agency, and a smart card reader. If the smart card supports NFC, then the smart card reader is not needed, but your device must support NFC.
Currently, readers from ACS or SCM/Identive that can be connected to the device (either with USB or with Bluetooth) are supported. You can use a USB-A to USB-B-mini adapter to connect a normal USB based smart card to the device. SCS signer application works with a standard web browser (without additional extensions). Currently there is no limit on who (web site) can request SCS to sign data.
Note: SCS signer application is not allowed to run in rooted devices due to security reasons.
For more information on SCS see: http://developer.fineid.fi/scs/
SCS = Signature Creation Service
Note: During first startup SCS signer application will install a local SCS certificate (for enabling https access to SCS from browser) to your device. As a consequence to the certificate installation, your device will from time to time show you a notification stating "Network my be monitored by an unknown third party". This is an automatic notification by the Android platform to let you know that an application has installed certificates to your system.
Also, the SCS signer application requires that your device has a secure screen lock in use. If you don't have yet, it will be setup during the setup phase.
Requirements:
• A card reader, either with USB-A or USB-B-mini connector or Bluetooth support
• USB adapter (USB-A to USB-B-mini), if the card reader has USB-A connector
• smart card from PRC.
More about Digital and Population Data Services Agency: https://dvv.fi/en/certificates
Supported card readers are manufactured by ACS and Identive (was SCM). USB-A connector is the most common USB connector and USB-B-mini connector in the most common USB connector in Android devices. Bluetooth Low Energy (BLE) readers from ACS are also supported in devices with Android 4.3 or newer. Naturally those devices must have BLE support.
Tested readers:
• ACS ACR38U PocketMate II: http://www.acs.com.hk/en/products/228/acr38u-pocketmate-ii/
• ACS ACR3901U-S1 Bluetooth® Contact Card Reader (supported in Android 4.3 and later): http://www.acs.com.hk/en/products/392/acr3901u-s1-bluetooth%C2%AE-contact-card-reader/
• Identive CLOUD 2910 R
Testing site: https://dvv.fineid.fi/signing
Previous Versions
Here you can find the changelog of SCS signer application since it was posted on our website on 2016-12-29 06:22:14.
The latest version is 1.1.55 and it was updated on 2024-04-19 17:45:25. See below the changes in each version.
SCS signer application version 1.1.55 (2024-01-14)
Updated At: 2024-01-15
Changes: 1.1.55 (2024-01-14):
- application setup works in Android 14 (and older) devices
1.1.54 (2021-07-01):
- application setup works in Android 11 devices
- minor enhancements and fixes
SCS signer application version 1.1.54 (2021-07-01)
Updated At: 2021-07-01
Changes: 1.1.54 (2021-07-01):
- application setup works in Android 11
- minor enhancements and fixes
1.1.50 (2020-12-03):
- supports MAV 4.2 and Multiapp 4.0.1 cards
- supports check of app update availability
- minor enhancements and fixes
1.1.49 (2020-02-09):
- new setup procedure (new permissions required)
- works in Android 10
- bigger pin query dialog
1.1.48 (2019-11-08):
- supports new card type (FINEID v4.0)
- updates required by newer Android versions
- stability improvements
SCS signer application version 1.1.50 (2020-12-03)
Updated At: 2021-01-07
Changes: 1.1.50 (2020-12-03):
- supports MAV 4.2 and Multiapp 4.0.1 cards
- supports check of app update availability
- minor enhancements and fixes
1.1.49 (2020-02-09):
- new setup procedure (new permissions required)
- works in Android 10
- bigger pin query dialog
1.1.48 (2019-11-08):
- supports new card type (FINEID v4.0)
- updates required by newer Android versions
- stability improvements
SCS signer application version 1.1.49 (2020-02-09)
Updated At: 2020-02-11
Changes: 1.1.49 (2020-02-09):
- new setup procedure (new permissions required)
- works in Android 10
- bigger pin query dialog
1.1.48 (2019-11-08):
- supports new card type (FINEID v4.0)
- updates required by newer Android versions
- stability improvements
SCS signer application version 1.1.48 (2019-11-12)
Updated At: 2019-12-18
Changes: 1.1.47 (2019-11-08):
- supports new card type (FINEID v4.0)
- updates required by newer Android versions
- stability improvements
SCS signer application version 1.1-45
Updated At: 2017-08-14
Changes: 1.1 (2017-08-14):
- maintenance release
1.1 (2017-06-20):
- maintenance release
1.1 (2017-05-29):
- version 1.1 (changes in authentication)
1.0.1 (2017-02-07):
- maintenance release
1.0.1 (2017-02-03):
- maintenance release
1.0.1 (2017-01-10):
- user interface enhancements
- SCS notification can be dismissed
- updated some support libraries
1.0.1 (2016-11-23):
- maintenance release
1.0.1 (2016-11-01):
- setup procedure enhancements
SCS signer application version 1.0.1-37
Updated At: 2016-11-23
Changes: 1.0.1 (2016-11-23):,- maintenenace release,1.0.1 (2016-11-01):,- setup procedure enhancements,1.0.1 (2016-10-28):,- setup procedure more enhanced,- coarse location permission added due to bluetooth discovery,- minor enhancements on user interface and error handling,1.0.1 (2016-10-11):,- pin handling enhanced,- setup procedure streamlined
Disclaimer
Official Google Play Link
We do not host SCS signer application on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for SCS signer application is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
